AmbiCom WL1100B-AR Chapter 4 Troubleshooting

-29-

Chapter 4 Troubleshooting

If you have trouble using the WL1100B-AR Wireless LAN Access Router, the starting point

to troubleshoot the problem with your WL1100B-AR Wireless LAN Access Router is looking

at the LED activity of the WL1100B-AR Wireless LAN Access Router. The following is

“LED Error Table” provided to assist you in diagnosing and solving operational problems.

PWR AP WLAN

LAN LINK Description/Action

Steady

Green

Continuous

Green Flash

Green -

Normal operation where flickering

indicates interface activity.

n No action required.

Continuous

Green

On Off Off -

Normal operation that indicates

there is no LAN activity.

n No action required.

Off Off Off Off Off Power failure.

n Check the power cord.

n Check the power supply.

Off Off Off Off

Invalid loader firmware or the

micro-controller is dead.

n Return the unit to the vendor

for support.

Blink Green

- - -

Invalid WL1100B-AR Wireless

LAN Access Router firmware.

n Upgrade the firmware via the

utility or console mode.

Blink Green

Blink

Green - -

Wireless LAN initialization failure

n Check whether the wireless

module has been properly

installed.

Continuous

Green

Blink Green

- Blink

Green - Ethernet initialization failure

n Return the device to the vend

for support.