Connecting to Preamp or Computer Outputs | AMC iM05 guide

XLR Balanced Connection

Assure that the power switch of the iM05 is turned off and that the volume control of the iM05 is turned down to a minimum. Connect the male end of an XLR balanced cable to the balanced input of the iM05 (refer to the following diagram for balanced connection).

TRS Balanced/Unbalanced Connection

Assure that the power switch of the iM05 is turned off and that the volume control of the iM05 is turned down to a minimum. Connect the male end of a TRS balanced or TS unbalanced cable to the TRS input of the iM05 (refer to the following diagram for TRS connection).

Connecting to Preamp or Computer Outputs

Before connecting, make sure the output device's power has been turned off. Plug the XLR balanced, TRS balanced or TS unbalanced cable to the corresponding output connectors of a pre-amplifier, computer or game console.

8

Image 9

AMC iM05 manual Connecting to Preamp or Computer Outputs, XLR Balanced Connection, TRS Balanced/Unbalanced Connection

Contents

IM05 Table of Contents Page Important Safety Instruction Introduction IM05 FeaturesWhats in the Box? Woofer Network & Power Amplifiers Front and Rear Panel FeaturesSub-Frequency Port EnclosurePage Front Panel Features InstallationPrecautions Connecting to Preamp or Computer Outputs XLR Balanced ConnectionTRS Balanced/Unbalanced Connection Architectural Multi-zone speaker applications Studio Monitor Speaker Applications Appendix a Technical Specifications Part No.21R-4212