AMC SCD23/D24 manual System requirements, Recording with a DV connection cable

ENGLISH

IEEE 1394 Data Transfer

●System requirements

■CPU : faster Intel® Pentium III™ 450Mhz compatible.

■Operating system : Windows® 98SE, ME, XP, Mac OS (9.1~10.2)

■Main memory : more than 64 MB RAM

■IEEE1394 add-on card or built in IEEE1394 card

Recording with a DV connection cable

1. Set the power switch to PLAYER mode.

2. Connect the DV cable (not supplied) from the DV IN/OUT port of

the camcorder to the DV IN/OUT port of the other DV device. ■ Make sure that DV IN appears on the screen.

3. Press the START/STOP button to begin REC PAUSE mode. ■ PAUSE is displayed on the OSD.

4.Start playback on the other DV device while you monitor the picture.

5.Press the START/STOP button to start recording.

■If you want to pause recording momentarily, press the START/STOP button again.

6.To stop recording, press the (STOP) button.

Notes

■When using this camcorder as a recorder, the pictures that appear on a monitor may seem uneven, however recorded pictures will not be affected.

■Operations are not guaranteed for all of the recommended computer environments mentioned above.

76