Emptying The Water Container
This air conditioning does not require emptying of the water container, except prior to season end storage.
This portable AC features the
Innovative AutoDrain NanoMist Technology™
Very little excess water should accumulate. During the process of cooling, some of the water accumulated is actually used to cool the unit internally, making it run more efficiently. Both this evaporative technology and Innovative AutoDrain NanoMist Technology™ are features not found in most portable air conditioners.
Switch off the unit and remove the plug from the outlet.
•Position a flat container or dish on the floor under the drain hole. Do not allow the water to drip continuously into the container as it might easily overflow.
•Remove the drain knob.
•Remove the rubber plug, the water will flow in the container. When this is nearly full, replace the plug to stop the water flow and empty it. Repeat this process until all water has been removed.
•Replace the rubber plug into the drain hole firmly, the water full led should not flash any longer.
•Replace the drain knob.
Rubber plug |
Drain knob |
9
