How the Air Purifier Works
Setting the Fan Speed:
A.If the unit is in the
B.Pressing the SPEED button (2) repeatedly will cycle through this sequence: high fan speed – medium fan speed – low fan speed –
C.The fan speed is shown on the LCD screen with bar graphs on each side and by the fan symbol , turning at different rates.
Ionizer
A.Press the IONIZER button (3) when the unit is operating and the IONIZER will turn on and off.
B.The IONIZER operation is shown on the LCD screen with a tree symbol with upward motion.
Timer Operation: 8h
A.Press the TIMER button (4) repeatedly when the unit is operating and the timer digit at bottom of the LCD screen will count up from 1 to 8 hours, turn off the timer function and then start again counting up from 1 to 8 hours.
B.The unit will operate for the number of hours selected using the TIMER button (4). As each hour passes the timer digit display will go down one hour.
C.At the end of the timed period the unit will turn off.
A Word About the AM-90
This manual has been prepared to acquaint you with the proper installation, operation and maintenance of your
Please do not attempt to open, repair and/or clean any of the internal parts of the
We would like to take this opportunity to thank you for choosing an Amcor product, and to assure you of our continuing interest in your comfort, pleasure and health.
Safety
•The
•Do not clean the
•Do not insert any object into the openings of the
•Disconnect the product from the electrical outlet before cleaning the unit or any of its components.
•Do not connect the
•WHEN NOT IN USE STORE OUT OF REACH OF CHILDREN!
Warning
•Any service, other than regular cleaning or filter replacement should be performed by an authorized service representative. Failure to do so could result in loss of warranty.
•To reduce the risk of electric shock, this equipment has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact qualified personnel to install the proper outlet.
Do not alter the plug in any way.
•If the supply cord becomes damaged, it must be replaced by the manufacturer or its service agent or similarly qualified person in order to avoid a hazard.
6 | 3 |