First Card for this PC | 3 |
Installing the Graphics Card
Note: Make sure that your system has an adequate power supply.
1.Make sure the computer, monitor, and other peripheral devices are off.
2.Unplug the computer power cord and disconnect the monitor cable from the back panel of the computer.
Caution:
To avoid possible damage to the motherboard, wait approximately 20 seconds after unplugging the power cord before disconnecting a peripheral or removing a component from the motherboard.
3.Remove the computer cover.
Caution:
Remember to discharge your body’s static electricity by touching the power supply case or the metal surface of the computer chassis.
Tip: If necessary, consult the computer manual for help removing the cover.
4.Remove any existing graphics cards from the computer.
Warning:
Some graphics cards can get hot while operating. Wait approximately five minutes after turning off the computer before touching the card.
5.Locate the appropriate bus slot on the motherboard. If necessary, remove the corresponding back panel cover.
6.Align the new graphics card in the bus slot and press firmly until the card is fully seated.
© 2007 Advanced Micro Devices, Inc. | ATI Radeon HD 3600 Series |
