English

1-3 Installation of the CPU and Heatsink

Before installing the CPU, please comply with the following conditions:

1. Please make sure that the motherboard supports the CPU.

2. Please take note of the one indented corner of the CPU. If you install the CPU in the wrong direction, the CPU will not insert properly. If this occurs, please change the insert direction of the CPU.

3.Please add an even layer of heat sink paste between the CPU and heatsink.

4.Please make sure the heatsink is installed on the CPU prior to system use, otherwise overheating and permanent damage of the CPU may occur.

5.Please set the CPU host frequency in accordance with the processor specifications. It is not recommended that the system bus frequency be set beyond hardware specifications since it does not meet the required standards for the peripherals. If you wish to set the frequency beyond the proper specifications, please do so according to your hardware specifications including the CPU, graphics card, memory, hard drive, etc.

1-3-1 Installation of the CPU

Check the processor pins to see that none are bent. Move the socket lever to the unlocked position as shown in Fig. 1 (90o to the plane of the motherboard) prior to inserting the processor. The pin 1 location is designated on the processor by a copper triangle that corresponds to a triangle marking on the socket as shown in Fig. 2. Align the processor to the socket and gently lower it into place. Do not force the processor into the socket.

Socket Lever

Fig.1

Position lever at a 90-degree angle.

 

Fig.2

Pin 1 location on the socket and processor.

Gently place the CPU into position making sure that the CPU pins fit perfectly into their holes. Once the CPU is positioned into its socket, place one finger down on the middle of the CPU and gently press the metal lever back into its original position.

Please use extra care when installing the CPU. The CPU will not fit if positioned incorrectly. Rather than applying force, please change the positioning of the CPU.

GA-K8NSC-939 Motherboard

- 12 -

Page 12
Image 12
AMD GA-K8NSC-939 user manual Installation of the CPU and Heatsink

GA-K8NSC-939 specifications

The AMD GA-K8NSC-939 motherboard is an advanced platform designed to support AMD's 64-bit processors, particularly those based on the K8 architecture. This motherboard, built by Gigabyte, is a standout choice for enthusiasts and gamers seeking a balance between performance and functionality.

One of the main features of the GA-K8NSC-939 is its chipset, the NVIDIA nForce3 250. This chipset enhances the motherboard's capabilities, offering improved memory bandwidth and better overall system performance. The GA-K8NSC-939 supports AMD's Socket 939, which allows users to install various processors, including the Athlon 64 and Athlon 64 FX series. This compatibility ensures users can leverage enhanced processing power while taking advantage of the extended memory support up to 4GB of DDR RAM.

In terms of memory, the motherboard supports Dual Channel DDR400, enhancing the overall data transfer rates and system responsiveness. The Dual Channel configuration facilitates simultaneous data access, making it particularly beneficial for running demanding applications such as gaming, video editing, and content creation.

Another notable characteristic is the integrated NVIDIA GeForce 6100 GPU, which provides decent graphics performance without requiring a dedicated graphics card. This feature is ideal for users engaging in casual gaming or multimedia tasks, while still allowing for the addition of a higher-end graphics solution through its PCI Express x16 slot when needed.

The GA-K8NSC-939 motherboard also includes several connectivity options that cater to modern users. It features a mix of SATA and IDE ports for connecting storage drives, ensuring compatibility with a host of devices. Additionally, the built-in Gigabit Ethernet offers high-speed internet connectivity, essential for online gaming and streaming.

Moreover, the motherboard is equipped with multiple USB 2.0 ports, enabling users to connect various peripheral devices easily. This connectivity flexibility ensures that users can expand their computing experience without hassle.

Power and thermal management are also addressed with solid capacitors and an efficient PCB design. This ensures stability and longevity while keeping the system cool during operation.

In conclusion, the GA-K8NSC-939 motherboard is a versatile and reliable choice for users looking to build a robust system based on AMD's 64-bit technology. Its combination of advanced features, solid performance, and expandability makes it a viable option for gaming, multimedia, and general computing needs. Whether for a budget build or a performance-oriented system, this motherboard remains a compelling choice.