AMD KM780V Floppy drive Connector 34-pin block FDD, Primary IDE Connector 40-pin block IDE1

	VGA Connector	RJ-45 LAN
	SPDIF_OUT	Line-IN
	Connector
PS/2 Mouse
		Line-OUT
PS/2 Keyboard		MIC-IN
	HDMI Connector DVI Connector	USB USB

(7) Floppy drive Connector (34-pin block): FDD

This connector supports the provided floppy drive ribbon cable. After connecting the single plug end to motherboard, connect the two plugs at other end to the floppy drives.

FDD

Pin 1

Floppy Drive Connector

(8) Primary IDE Connector (40-pin block): IDE1

This connector connects to the next set of Master and Slave hard disks. Follow the same procedure described for the primary IDE connector. You may also configure two hard disks to be both Masters using one ribbon cable on the primary IDE connector and another ribbon cable on the secondary IDE connector.

•Two hard disks can be connected to each connector. The first HDD is referred to as the “Master” and the second HDD is referred to as the “Slave”.

•For performance issues, we strongly suggest you don’t install a CD-ROM or DVD-ROM drive on the same IDE channel as a hard disk. Otherwise, the system performance on this channel may drop.

IDE1

Pin 1

Primary IDE Connector

8