Chapter 1 General Information 9
1.7 Mounting

1.7.1 Panel mounting

If you decide to use a cutout within a panel to mount your PPC-L106T,
we have included two panel-mount brackets. The brackets have two
screws that fit in the keyhole slots on the panel PC.
Slide the PPC-L106T backwards into the panel opening. Attach the two
mounting brackets by sliding the two screw heads into the keyhole slots
on the rear cover. Secure the PPC-L106T against the back of the panel
opening.
Figure 1.4: PPC-L106T rear panel mounting brackets