BASIC OPERATION (CONT.)
15.PITCH BENDING
•This function momentarily increases or decreases the playback speed of a CD respectively when the
+PITCH BEND or - PITCH BEND button is pressed. The extent to which the speed changes is proportionate to the amount of time the button is pressed. For example, if the + PITCH BEND BUTTON is held down continuously, the CD’s speed increases and will continue to increase until reaches a maximum of 16% gain in speed. When you release the + PITCH BEND BUTTON the speed of the CD will automatically return to it’s previous speed.
•The pitch can be changed from +/- 8%, +/- 12% or +/- 16% range. See changing PITCH PERCENTAGE.
•The jog wheel will temporarily bend the pitch if a track is in play mode. Rotating the wheel clockwise
will speed up your track and rotating the wheel
16. TRACK PROGRAM PLAY
•This function allows you to program up to 20 tracks and have them replayed in any order.
•To program a track in to memory:
1)Be sure the drive is in PAUSE or CUE MODE.
2)Press the PROG. BUTTON to activate the units program mode. The program indicator LED above the PROG BUTTON will light and the PROGRAM INDICATOR in the LCD DISPLAY will turn on indicating that PROGRAM MODE has been activated.
3)Select a Track by using the FORWARD AND REVERSE TRACK BUTTONS, and again press PROG. BUTTON this will enter the track into memory.
4)Repeat this up to 19 times (i.e. up to 20 tracks can be programmed). If you keep pressing the PROG. BUTTON the LCD DISPLAY will indicate which tracks have been programmed.
(4)Press the PLAY BUTTON to begin playing programmed tracks.
(5)To cancel the program press and hold down the PROG. BUTTON for more than two (2) seconds.
17.Time Display (see figure 14)
•Pressing the TIME button repeatedly will change the select time display mode:
A = Elapsed playing time.
B = Remaining time in a selection.
C = Total remaining time of the disc.
Fig. 14
American DJ® AUDIO •
