FUNCTIONS & CONTROLS CONT.
REMOTE UNIT REAR PANEL | FIGURE 4 |
|
|
|
| 1 | 2 | 3 | 4 |
|
|
|
1. | PLAYER 2 REMOTE CONNECTION | 3. | PLAYER 1 REMOTE CONNECTION |
2. | PLAYER 2 CONTROL | 4. | PLAYER 1 CONTROL |
LCD DISPLAY | FIGURE 5 |
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
| 1. | TRACK (Current track indicator) | |
|
|
|
|
|
|
|
|
|
| 2. | MINUTES INDICATORS (Displays current minutes) | |
|
|
|
|
|
|
|
|
|
| 3. | SECONDS INDICATORS (Displays current seconds) | |
|
|
|
|
|
|
|
|
|
| 4. | FRAME INDICATORS (Displays current frame) | |
|
|
|
|
|
|
|
|
|
| 5. | BAR (Bar Indicator) | |
|
|
|
|
|
|
|
|
|
| 6. | ELAPSED (Elapsed time Indicator) | |
|
|
|
|
|
|
|
|
|
| 7. | CONTINUE INDICATOR | |
|
|
|
|
|
|
|
|
|
| 8. | SINGLE INDICATOR | |
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 9. | REMAIN INDICATOR | |
10. | PITCH PERCENTAGE | |||||||||||
|
|
|
|
|
|
|
|
|
| |||
A.DRIVE TRANSPORT (Figures 1 & 2)
1)POWER (Power On/Off Button) - When the POWER Button is pressed, the power turns on, press again to turn power off.
2)PLAYER 1 TRANSPORT TRAY- Place the a compact discs in this tray.
3)PLAYER 1 OPEN/CLOSE BUTTON - Press it to open and close the player one’s transport tray. The disc holders cannot be opened during playback, so stop playback before pressing these buttons.
4)PLAYER 2 OPEN/CLOSE BUTTON - Press it to open and close the player one’s transport tray. The disc holders cannot be opened during playback, so stop playback before pressing these buttons.
5)PLAYER 2 TRANSPORT TRAY- Place the a compact discs in this tray.
6)PLAYER 2 REMOTE CONTROL CONNECTOR - Connect this connector to the
remote unit using the included control cord.
7)PLAYER 2 DIGITAL OUTPUT (RCA TYPE) - Connect to a DAT or CDR to make almost perfect copies of your CDs.
8)PLAYER 2 RCA LINE OUT - Player 2 audio signal output.
9)VOLTAGE INPUT SELECTOR - This select between an incoming voltage 115v or 220v. Be sure the switch is in the proper position for your area.
10)POWER CONNECTION - Plug in to a standard wall outlet, to feed power to your unit.
11)PLAYER 1 REMOTE CONTROL CONNECTOR - Connect this connector to the remote unit using the included control cord.
12)PLAYER 1 DIGITAL OUTPUT (RCA TYPE) - Connect to a DAT or CDR to make almost perfect copies of your CDs.
13)PLAYER 1 RCA LINE OUT - Player 2 audio signal output.
American DJ® AUDIO •
