SINGLE
TOTAL
REMAIN
TRACK M S F
PI T C HTI ME
S G L
C TN
SINGLE
TOTAL
REMAIN
TRACK M S F
PI T C HTIM E
S G L
C TN
SINGLE
TOTAL
REMAIN
TRACK M S F
PI T C HTIM E
S G L
C TN
SINGLE
TOTAL
REMAIN
TRACK M S F
PI T C HTIM E
S G L
C TN
2) Press the IN BUTTON (3). This will set the
starting point of the Loop (figure 23). The IN
BUTTON (3) will blink.
1) Press PLAY/PAUSE BUTTON (16) to activate
playback mode.
14. CREATING AND PLAYING A LOOP
A loop is a sound loop that plays continuously. You can use this loop to create dramatic effect in your mixing.
This loop has no time limit and you could actually loop the entire length of disc. You create a loop between
two continuous points of a disc.
3) Press the OUT BUTTON (15) to set the ending
point for your Loop (Figure 24). The OUT and IN
BUTTON's will stay lit indicating a Loop is play-
ing. Press the OUT BUTTON again to stop the
Loop.
Figure 24
Figure 23
Figure 22
4) Press the RELOOP BUTTON (14) to reactivate
the loop. Press the OUT BUTTON (15) to deacti-
vate the loop.
Figure 25
BASIC OPERATION
©American Audio® - www.americanaudio.com - MCD-110™ Instruction Manual Page 17