©American Audio® - www.americanaudio.com - MCD-110™ Instruction Manual Page 5
PRODUCT INFORMATION

LINE VOLTAGE SELECTION

• The MCD-110 is designed to operate in
either a 120 volts or 220 volts environment.
• Before changing the operating voltage
voltage be sure main power is disconnect-
ed.
• The desired voltage may be set with the
VOLTAGE SELECTOR switch on the rear
panel (using a flat head screw driver).
• Do not force the VOLTAGE SELECTOR
switch as this may cause damage
• If the VOLTAGE SELECTOR switch does
not move smoothly, please contact a quali-
fied service technician.

WARRANTY INFORMATION

The MCD-110™ carries a ONE year (365 days)
limited warranty. This warranty covers parts
and labor. Please fill out the enclosed warranty
card to validate your purchase. All returned
service items whether under warranty or not,
must be freight pre-paid and accompany a
return authorization (R.A.) number. The R.A.
number must be clearly written on the outside
of the return package. A brief description of
the problem as well as the R.A. number must
also be written down on a piece of paper and
included in the shipping container. If the unit
is under warranty, you must provide a copy of
your proof of purchase invoice. You may obtain
a R.A. number by contacting customer support
at (800) 322-6337.
VOLTAGE SELECTOR SWITCH
1998.01.12
CLASS 1
LASER KLASSE 1
LASER PRODUCT
I. Read Instructions - All the safety and operat-
ing instructions should be read before the CD
Player is operated. The safety and operating
instructions should be saved for future
reference.
2. Heed Warnings - All warnings on the CD
Player and in the operating instructions
should be adhered to.
3. Water and Moisture - The player should not
be used near water - for example, near a
bath tub, kitchen sink, laundry tub, in a
wet basement or near a swimming pool, etc.
4. Ventilation - The CD Player should be situated
so that its location or position does not inter-
fere with its proper ventilation. For example,
the CD player should not be situated on
a bed, sofa, rug, or similar surface that may
block the ventilation openings; or, placed in
a built-in installation, such as a bookcase
or cabinet that may impede the flow of
air through the ventilation openings.
5. Heat - The CD player should be situated
away from heat sources such as radiators,
heat registers, stoves, or other appliances
(including amplifiers) that produce heat.
6. Power Sources - The CD player should be
connected to a power supply only of the
type described in the operating instructions
or as marked on the CD Player.
7. Servicing - The user should not attempt
to service the CD Player beyond that
described in the operating instructions. All
other servicing should be referred to quali-
fied service personnel. The Player should be
serviced by qualified service personnel when:
A. The power-supply cord or the plug has
been damaged.
B. Objects have fallen, or liquid has been
spilled into the CD Player.
C. The CD Player has been exposed to
rain or water.
D. The CD Player does not appear to
operate normally or exhibits a marked
change in performance.