COMPUTEr CONNECTION

1. CONNECTINg ThE VMS4 TO yOUr PC

Connect the VMS4 to your PC by using the USB ports located on the rear of the VMS4 and your PC. Connect
the supplied USB cable to the USB port on the rear of the VMS4, and the other end connects to the USB port
on your computer. NOTE: Before connecting your VMS4 to your computer or laptop, we highly recom-
mend that you install the provided software. The Virtual DJ version included with this product is specifi-
cally tailored to work with the VMS4 with no setup required. The setup of other non-factory authorized
drivers and software is far more complex and in some instances not as reliable.
Speaker Cables
American Audio V4000
©American Audio® - www.americanaudio.us - VMS4™ Instruction Manual Page 23