American Audio WM-UHF16 WM UHF16 RECEIVER CONTROLS AND FUNCTIONS

©American Audio® - www.americanaudio.com - WM UHF16™ Instruction Manual Page 5

WM UHF16 ™ RECEIVER CONTROLS AND FUNCTIONS

1. Antenna - Receives RF signals from the transmitter.

2. Balanced XLR Output - This balanced XLR output can be used to connect the receiver to bal-

anced input of mixer or ampliﬁer.

3. Unbalanced 1/4” Output - This unbalanced output can be used to connect the receiver to the

aux-level input of a mixer or ampliﬁer.

4. 12v DC Input - Connect the included power supply to this input, or any other 12v power adapter.

5. Main Power Switch - This is main power ON/OFF switch for the receiver. A red LED on the

switch should glow indicating that the power is ON.

6. Channel Frequency Knob - Use this knob to choose the receiver operating frequency. The trans-

mitter must be set to the same frequency. You can change the channel with a small ﬂat head screw-

driver.

7. Volume Knob - Controls the volume of the receiver output.

8. AF Indicator LED - This LED will indicate when the clearest transmitter signal has been reached.

9. RF Indicator LED - This LED will ﬂicker when receiving a signal from the transmitter.

98765

1 432