©American Audio® - www.americanaudio.com - WM UHF16™ Instruction Manual Page 9
GENERAL Model: American Audio® WM UHF 16 - Wireless Microphone
System: Single Channel UHF Wireless Microphone System
Dimensions: 3 1/4” ~ 4 1/2” H x 8 1/2” W x 10 3/8” L
Installation: Place on flat surface or mount in flat case
Weight: 5.3 Lbs. / 2.4 kgs
Power supply: DC 12V - 18V / AC 115v/230v, 50/60Hz
Power consumption: 14W
Environmental conditions: Operational temperature: 5 to 35˚C (41 to 95˚F)
Operational humidity: 25 to 85% RH (non-condensation)
Storage temperature: -20 to 60˚C (4 to 140˚F)
Accessories:
RECEIVER:
Frequency Range: 471.600~ 482.850M Hz
6000Hz per Channel, total 16 Ch.
Frequency Stability: + 0.005%
T.H.D. Rate: <= 1% (at 100mV 1KHz)
Diversity: None
Tone Signal: 32.768KH
Oscillation Mode: PLL
Power Output: Balance or Unbalance 150mV (600 Ω)
Dynamic Range: > 96dB
Image & Spurious: > 70dB
Receiving sensitivity: < 5 µ V over 60dB S/N radio
Receiving moed: PLL 16 selectable frequency
Power supply: DC 12V - 18V
S/N ration: More than 95dB
Selectivity: More than 60dB
Receiving range: 45M (150ft)
TRANSMITTER:
Frequency range: 471.000~ 481.650M Hz
Frequency stability: +0.005%
T.H.D. rate: <= 1% (at 100mV 1KHz)
Oscillation mode: PLL
Spurious Emission: 50dB
Power output: 20mW (max)
Maximum FM deviation: 30KHz
Current consumption: < 40mA
NOTES:
The specifications are subject to change to any improvement by negotiations in advance.
The parts are subject to change to any improvement within the range of the specifications.
SPECIFICATIONS