American Audio manual Technical Specifications model XDM-3633

Replacing the Crossfader

• Disconnect from main power supply

• Remove the fader knob.

•Remove the two outer screws.

•Take the fader out and unplug the connection cables.

•Connect the new fader and replace back into mixer.

Technical Specifications - model XDM-3633

Inputs:

Line: 75mV, 27k Ohm • Microphone: 1.5mV, 600 Ohm • Phono: 1.2mV, 47k Ohm Output: Line: 9V, peak to peak • Headphones: 5W @ 47 Ohm • Distortion: less than 0.03% Signal-To-Noise Ratios:

Line: Better than 88dB • Microphone: Better than 78dB • Phono: Better than 83dB

Frequency Response:

Line: 20Hz - 15KHz, ± 0.5dB • Microphone: 20Hz - 20KHz, ± 0.5dB

ChanneI EQ:

Bass / Mid /Treble: -35dB - +12dB

Talkover Attenuation: - 15 - -26dB

Microphone EQ: Bass: + /-12dB @ 100Hz • Treble: -/+12dB @ 10 kHz

Headphone impedance: 16 Ohms

Crossfader: FF-2

Power supply: AC 115/230V, 50/60Hz switchable

Power Consumption: 12W typical, 15W w/ full headphone output

Dimensions: 19" W x 10.5" D x 3.5" H / 483 x 264 x 120 mm (6 rack mount spaces)

Weight: 12 lbs. / 6.5 kg

American DJ® AUDIO

4295 Charter Street

Los Angeles, CA 90058 USA

www.americandj.com

Warranty & Service

The XDM-3633 has a 2-year limited warranty. Mail in warranty card as soon as possible.

For Service, contact your local American DJ® Dealer.

© American DJ® AUDIO Los Angeles, CA 90058 USA

Specifications subject to change without notice.

XDM-3633 User Instructions page 8