2. Operation Guide
2.1.6 Scene Mode
Press the Mode pedal several times until the
In Scene mode, press Up/Down pedal to select the scene.
2.2 Scene Channel Dimmer Mode
Press and hold down the Mode pedal 3 seconds until the
Press Up/Down pedal to adjust the intensity of channel 1 for the current scene. Once the intensity is set, press Mode pedal to select channel 2, then adjust the intensity for the channel. 00 will give the lowest intensity, and FF will give full intensity.
Repeat the above steps until all four channels are set. Press and hold down the Mode pedal 3 seconds to deactivate this mode.
SE.S
2.3 Full On
Press the Full On pedal, all channel LEDs will be fully on, all channel will be full output. Release this pedal deactivates this function and return to normal mode.
Press and hold down the Full On pedal 2 seconds, scene 11 is activated. Press this pedal again to leave this scene and return to normal mode.
7