Quick guide
Turning on the power
Press a on the TV.
• The B indicator on the TV changes from red to green.
Standby mode
Press B on the remote control unit.
•The TV enters standby mode and the image on the screen disappears.
•The B indicator on the TV changes from green to red.
Turning off the power
Press a on the TV.
•The B indicator on the TV gradually turns off.
•When the TV is turned off by a, you cannot turn on the power by pressing B on the remote control unit.
Display status indicator
Off | Power off |
|
|
Red | The TV is in standby mode. |
|
|
Green | The TV is on. |
|
|
NOTE
•If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the power outlet.
•Weak electric power is still consumed even when a is turned off.
Initial auto installation
When the TV powers on for the first time after purchase, the initial auto installation is invoked. You can automatically set language, country and channels in successive operations.
NOTE
•The initial auto installation functions only once. If the initial auto installation is not completed, (ex: When menu screen disappeared by not operating for a few minutes, when the power shut down, etc.), try Auto Installation from the Setup menu. (See page 14.)
•The initial auto installation stops by pressing RETURN.
1 Setting the
1Press a/b/c/d to select the desired language listed on the screen.
2Press OK to enter the setting.
2 Setting the country or area
1Press a/b/c/d to select your country or area listed on the screen.
2Press OK to enter the setting.
• The programme auto search starts at the same time.
After this setting, auto search starts with the following order.
1Programme auto search
2Auto labelling
3Auto sorting
4Preset download
You do not need to do anything during the auto search.
The setup menu disappears and you can watch the programme on channel 1.
Using the programme list
You can also select the desired channel from programme list instead of using
1 Press OK when no other menu screen is displayed. (Except external input.)
2 Press a/bto select the desired channel to tune in, and then press OK.
3 Press END to exit the Programme List.
7
