TOA Electronics C-DR161 CU Series, C-DR091 CU Series operating instructions Stop mode

Recording within a scheduled time period

[ Recording only when Priority recording is initiated or alarm event occurs ]

To stop recording within the scheduled time period, set all cameras to “Recording OFF” in normal recording settings. To perform recording only when Priority recording or Alarm Event recording is initiated, recording is performed as shown in the following figure.

					(1)	If the Priority recording's event occurs, Pre-Recording is first
		Priority recording
						made, then Priority recording begins.
					(2)	When the Priority recording ends, recording reverts to recording
Priority recording
						stop mode.
		start		Start	End
1		Pre-Alarm	2	5	6 (3)	If Alarm Event recording is initiated, Pre-Recording is first made,
		recording
			End			then Alarm Event recording begins.
	Pre-Alarm
recording start					(4)	When the preset Alarm Event recording interval elapses, recording
						reverts to recording stop mode.
		Recording stop

(5) Priority recording is initiated if a Priority signal is received or if

Pre-Alarmmanually started during Alarm Event recording.

recording start

			(6) When the Priority recording ends, recording reverts to Normal
3	Pre-Alarm	4
	recording		recording.
Alarm event		End
	start

Alarm event recording

Alarm input recording Motion-detected recording

Notes

•Even if Priority recording or Alarm recording is initiated, it is made following Pre-Recording.

•Pre-Recording is initiated when the Pre-Alarm interval is set to 1 second or more.

Recording outside scheduled time periods

[ Recording only when Priority recording is initiated ]

Recording is performed as follows outside the scheduled time period.

Priority recording

Priority recording
		start
1			Pre-Alarm	2
			recording
	Pre-Alarm			End
recording start

Recording stop

(1)When the Priority recording's event occurs, Pre-Recording is first made, then Priority recording begins.

(2)When the preset Priority recording interval elapses, recording reverts to recording stop mode.

Notes

•Normal recording and Alarm event recording cannot be performed.

•If Priority recording is initiated, Pre-Recording is first made, then Priority recording begins.

•Pre-Recording is initiated when the Pre-Alarm interval is set to 1 second or more.

42