31.3. How to Log In
There are two types of accounts: "Administrator" accounts and "User" accounts.
Administrator account can access to all operations, while User account can access to the limited operations: live image monitoring; notification by LED indicator and camera control.
1.Open a web browser on a PC.
Note
Open a web browser using a single PC. It may not operate properly if multiple PCs have accessed.
2.Enter the Digital Video Recorder’s network IP address into the web browser address. (Refer to p. 90; Network setting.) The authentication screen is displayed.
3.Enter an account name and a password. Administrator account name: root User account name: user
Note
It is recommended that WEB User password and WEB Administrator password be set. The PC user could change the settings if the password is not set. (Refer to p. 90; Network settings.)
4.Click on "Login" to display the top page.
Note
If an incorrect account name or password has been entered, the display reverts to the authentication screen.
31.3.1. Access inhibit
Up to 3 PCs are connectable. Up to 3 user accounts are accessible. Only one administrator account is accessible. If an administrator account is registered into 1 PC, then up to 2 more PCs can be connected with user accounts.
If the number of connected persons reaches the maximum limit, further operation is prohibited and the following screen is displayed. Also, if 1 PC is connected with the administrator account, then logging in to the second PC with the administrator account will cause the same screen to be displayed.
The maximum number of users are connected please try again later.
Pressing the "OK" button returns the display to the authentication screen.
