TOA Electronics C-DR091 CU Series, C-DR161 CU Series Priority recording setting

23.1. Priority recording setting

Priority recording is given higher priority over Auto-recording. Use this recording mode to check recording details when, for example, a suspicious person intrudes or when making recording outside the scheduled time period. (Refer to p. 39; Priority recording.)

P R I O R I T Y R E C S E T T I N G
R E C S E T T I N G
P R I O R I T Y R E C I N P U T M O D E	L E V E L
A U D I O	O N
P O S T T I M E	1 1 1 S E C

Item	Selection	Description
REC SETTING		Refer to p. 78; Recording Setting for setting selections.
PRIORITY REC	LEVEL / EDGE	Set either "Level" or "Edge" depending on the type of signal input to the Priority
INPUT MODE		Recording Input Terminal.
		For information on recording operation when the Level or Edge mode is selected,
		see " Recording Operation When Edge/Level Settings Are Performed" on page 43.
AUDIO	ON / OFF	ON: Audio is also simultaneously recorded for the duration of Priority Recording.
		OFF: No audio is recorded.
POST TIME	0 - (60) - 999 SEC	Set the length of time after which Priority Recording will finish.
		0-999 SEC : Records for a set period of post-alarm time. This must be
	/ NO LIMIT
		1 second or more if the Priority Recording mode is set to
		"Edge," but can be set to 0 or more if this mode is set to "Level."
		NO LIMIT : Priority recording continues until stopped manually.

Note: Underlined settings represent factory-preset settings.

*1 If the Priority Recording mode is set to "Level," recording initiated by the Digital Video Recorder or remote controller Priority Rec key will continue until stopped manually.

77