TOA Electronics C-DR161 CU Series, C-DR091 CU Series operating instructions Screen Display Setting

24. SCREEN DISPLAY SETTING

It is possible to set specific screens to display or switch among specific live or recorded images or playback. It is also possible to set camera or DVR names and to set the display mode when monitor output is activated.

S C R E E N D I S P L A Y S E T T I N G
C H A R A C T E R D I S P L A Y S E T T I N G
M O N I T O R O U T P U T S E T T I N G
S E Q U E N C E	S E T T I N G
C A M E R A N A M E S E T T I N G
D V R N A M E	S E T T I N G		D V R 1 2 3
M O N I T O R 1	S C R E E N	9 S E G
M O N I T O R 2	S C R E E N	4 S E G – A
A L A R M D I S P L A Y I N T E R V A L			3 S E C

Item	Selection			Description
CHRACTER DISPLAY				For setting, refer to p. 87; Character display setting.
SETTING
MONITOR OUTPUT				For setting, refer to p. 88; Monitor output setting.
SETTING
SEQUENCE SETTING				For setting, refer to p. 88; Sequence setting.
CAMERA NAME				For setting, refer to p. 89; Camera name setting.
SETTING
DVR NAME SETTING				For setting, refer to p. 89; DVR name setting.
MONITOR 1 SCREEN	16 CH		9 CH	Set the screen to be displayed when Monitor 1 is activated.
	CAM 1-16 /	CAM 1-9 /
	4SEG-A - D /	4SEG-A - C /
	9SEG-A and B /	9SEG / SEQ
	16SEG / SEQ
MONITOR 2 SCREEN	CAM 1-16 /	CAM 1-9 /		Set the screen to be displayed when Monitor 2 is activated.
	4 SEG-A -D /	4SEG-A -C /
	SEQ	SEQ
ALARM DISPLAY	0 SEC - 120 SEC /			Set the full-screen display interval to be used by the corres-
INTERVAL	REC IN / NO LIMIT			ponding camera whenever recording has been initiated by
				an alarm event. *1 *2
				0 second: No full-screen display.
				1-120 seconds: Full-screen display occurs for the preset
				period of time.
				Rec In: Full-screen display occurs for the duration of recording.
				No Limit: Full-screen display continues to occur until display
				is switched manually.

Note: Underlined settings represent factory-preset settings.

*1 If multiple alarm events have been input simultaneously, the event that occurred last is given priority and displayed on the full screen.

*2 If the Alarm Event Recording mode is set to Sequence and multiple events are set, the camera with the lowest number is displayed on the full screen on the monitor.

86