10.2. Alarm Input Terminal Connections
The number of terminals available differs depending on whether the Digital Video Recorder is a
For 16 channel | For 9 channel |
ALARM IN
1 G 2 G 3 G 4 G 5 G 6 G 7 G 8 G
9 G 10 G 11 G 12 G 13 G 14 G 15 G 16 G
ALARM IN
1 G 2 G 3 G 4 G 5 G 6 G 7 G 8 G
9 G 
Terminal name | Symbol | Name |
1 | ALARM 1 | Alarm input 1 |
G | GND | Signal ground |
2 | ALARM 2 | Alarm input 2 |
G | GND | Signal ground |
3 | ALARM 3 | Alarm input 3 |
G | GND | Signal ground |
4 | ALARM 4 | Alarm input 4 |
G | GND | Signal ground |
5 | ALARM 5 | Alarm input 5 |
G | GNA | Signal ground |
6 | ALARM 6 | Alarm input 6 |
G | GND | Signal ground |
7 | ALARM 7 | Alarm input 7 |
G | GND | Signal ground |
8 | ALARM 8 | Alarm input 8 |
G | GND | Signal ground |
Terminal name | Symbol | Name |
9 | ALARM 9 | Alarm input 9 |
G | GND | Signal ground |
10 | ALARM 10 | Alarm input 10 |
G | GND | Signal ground |
11 | ALARM 11 | Alarm input 11 |
G | GND | Signal ground |
12 | ALARM 12 | Alarm input 12 |
G | GND | Signal ground |
13 | ALARM 13 | Alarm input 13 |
G | GNA | Signal ground |
14 | ALARM 14 | Alarm input 14 |
G | GND | Signal ground |
15 | ALARM 15 | Alarm input 15 |
G | GND | Signal ground |
16 | ALARM 16 | Alarm input 16 |
G | GND | Signal ground |
10.2.1. Terminal connection
The terminal connector is unlocked by pressing down on its release button. To connect the cable, press down on the release button first, insert the cable, then push the release button up again to lock the cable in place. However, for solid cables with diameters from 0.8 mm(AWG20) to 1.2 mm(AWG16), there is no need to press down on the release button. Cable can be connected simply by inserting it in place until it will not go any further.
Note
Ensure that the cable is securely locked into the terminal after connection.
1 Press down the
2Release button.
Insert a cable.
3 Push the release button up.
Applicable cable
•Solid conductor AWG26 (ø 0.4 mm) - AWG16 (ø 1.2 mm)
•Stranded conductor AWG24 (0.2 mm2) - AWG20 (0.75 mm2)
24
