FUNCTIONS AND CONTROLS CONT.
which play was started. Steady lighting of this LED indicates the ready condition. The CUE button can be held down to play a CD. When you release the CUE BUTTON it instantly returns to the CUE POINT.
8.TRACK BUTTON - This button is used to select a Forward Skip track to be played.
9.PLAY/PAUSE BUTTON - Each press of the PLAY/PAUSE BUTTON causes the operation to change from play to pause or from pause to play.
10.+10 BUTTON - This button is used to access tracks in increments of 10 i.e., If your on track 11 and press the +10 BUTTON you would go directly to track 21 (if 21 tracks are available) and so on.
11.PITCH SLIDER - The pitch can be changed from (+/- 8%), (+/- 12%) or (+/- 16%). Press the PITCH BUTTON (18) until the PITCH LED is lit, then move the PITCH SLIDER. The pitch will not be changed if the PITCH LED is off. Pitch percentage (%) can be changed by holding the PITCH BUTTON (18) and pushing the plus (+) BUTTON (14) to change the percentage (%) selection.
12.RELOOP BUTTON - If a LOOP has been made, but the CD Player is not actively in LOOP mode, press the RELOOP BUTTON to reactivate the LOOP. RELOOP will appear in the LCD DISPLAY (13). To exit loop, press the
OUT BUTTON (2).
13.LCD DISPLAY - Indicates all the functions, as they are occurring, with the CD. •The LCD will flash when in sleep mode - This is not a malfunction.
14.(+) &
15.SGL/CTN - You can choose between a single track to play or all tracks in order by pressing once or twice.
16.TIME BUTTON - The TIME BUTTON switches between ELAPSED TIME, REMAINING TIME and TOTAL REMAINING TIME, the current function will be displayed in LCD DISPLAY (13).
17.PROGRAM - Depress this button to stop the CD and enter the program mode. Note the word “PROGRAM” is indicated on the display. Select each track to be programmed with the forward and back SKIP BUTTONS (2 & 3) and press the PROGRAM BUTTON between selections. You can program up to 30 tracks. Press PLAY (9) to start the program. To exit and erase program mode hold the program button down for more than two seconds while the unit is stopped, open the disc tray, or turn off the power.
18.PITCH - (+/- 8%),
19.DISC TRAY - Press the OPEN/CLOSE BUTTON (1) to open and close the disc tray. Place CDs in the tray.
20.POWER SWITCH (Main power On/Off)
21.CONTROL JACK - Use this jack to connect a mini plug from the Pro DJ1 player to a compatible American DJ “Q Deck” mixer to activate the “Fader Q Start” function(See. “Q” Start Control on page 6 sec. e)
22.DIGITAL OUTPUT JACK - Use this jack to connect the digital output signal of Pro DJ1 to a Mixer, DAT, or any piece of equipment that accepts a digital in signal.
23.AUDIO OUT - Left and Right audio output. Connect RCA cables from AUDIO OUT to a mixer input.
24.VOLTAGE SELECTOR - Select which voltage desired: 115V or 230V. Always disconnect the power plug before changing the voltage.
25.POWER CONNECTOR/FUSE - IEC Power Connector with
26. PLAY INDICATOR ( ) - The PLAY indicators light during playback.
27.PROGRAM INDICATOR - This lights when program is selected or program play is selected.
28.SINGLE INDICATOR - This indicates that the player is in single play mode. Playback will stop and cue at the beginning of the next track.
29.LOOP INDICATOR - This indicator will flash when loop is engaged.
30.RELOOP INDICATOR - Displays when LOOP is engaged. LOOP flashes in LCD DISPLAY (13) when playing loop.
31.PITCH INDICATOR- Lights when PITCH (18) is engaged.
32 PITCH DISPLAY - Displays the percentage of pitch adjustment, according to the PITCH FADER (11).
36.TRACK INDICATOR - Displays which TRACK is being played.
37.PAUSE INDICATOR ( ) - The PAUSE indicators will light during pause or cue mode.
American DJ® AUDIO •