Operating Determinations

When installing this mixer, please make sure that the device is not exposed to extreme heat, moisture or dust! There should not be any cables lying around. Doing so endangers you as well as others.

Do not operate the mixer in extremely hot (more than 30˚C / 100˚F) or extremely cold (less than 5˚C / 40˚F) surroundings. Keep away from direct sunlight and heaters.

Operate the mixer only after becoming familiar with its functions. Do not permit operation by persons not qualified for operating the mixer. Most damages are the result of unprofessional operation!

Never use spray cleaners to clean the faders!

Never use solvents or abrasive detergents to clean the mixer! It is recommended that you use a soft damp cloth.

Please consider that unauthorized modifications on the device are forbidden due to safety reasons!

Connections (Refer to diagrams on pages 3 & 4)

•Make sure that the power switch (1) is set to OFF. Before connecting other devices to the mixer, all units have to be switched off and the Master Control (6) set to min.

•Make sure that the available voltage is not higher than stated on the voltage selector (22) before connecting to power.

•In order to obtain the highest sound quality, only use high quality American DJ®, Ameri-Cable™ cables for connecting devices. Make sure that the cables are properly fixed.

•Connect your amplifier to the OUT AMP jacks (19). Make sure that the channels are set properly.

•For recording, connect your tape recorder or cassette deck to the OUTPUT REC jacks (18). The REC OUT level will not be influenced by the Master Control (6).

•Connect your microphone to the Microphone Input (23) on the rear panel. (See diagram on page 4).

•Connect your record player(s) to the PHONO 1 jacks (16) and the PHONO 2 jacks (17) on the rear panel. You can only control the record player signal after switching the PHONO/LINE switches (2) to phono. The signal is then controlled via the CH-1 and CH-2 faders (4).

•Connect your tape recorder, tuner, sound effects, CD player, cassette deck or any other line signals to the AMP OUT jacks (16 & 17) on the rear panel. You can only control the line signals after switching the PHONO/LINE switches (2) to LINE. The signal is then controlled via the CH-1 and CH-2 faders (4).

© American DJ® AUDIO Los Angeles, CA 90058 USA

Specifications subject to change without notice. XDM-221 User Instructions page 2

Page 1 Page 3
Page 2
Image 2
American DJ XDM-221 warranty Operating Determinations, Connections Refer to diagrams on pages 3
Page 1 Page 3

XDM-221 specifications

The American DJ XDM-221 is a professional dual-channel DJ mixer designed to meet the demands of modern DJs. Known for its robust build quality and intuitive interface, the XDM-221 offers a host of features that enhance performance and creativity in any live setting.

One of the standout attributes of the XDM-221 is its dual-channel configuration, which allows DJs to seamlessly mix and transition between two different audio sources. This feature is particularly beneficial for mobile DJs and club environments, where quick changes and smooth transitions are crucial. The mixer includes two phono/line switchable inputs for connecting turntables or CD players, ensuring compatibility with various equipment types.

The XDM-221 is equipped with a 3-band equalizer on each channel, allowing for precise control over the audio frequency ranges. This feature enables DJs to finely tune their sound, enhancing the overall audio quality and making it easier to adapt to different musical styles or venue acoustics. Additionally, the mixer incorporates a dedicated crossfader, which is smooth and durable, providing reliable performance even after extensive use.

Another noteworthy characteristic of the XDM-221 is its built-in effects section. DJs can utilize various sound effects to add creativity to their sets, enhancing the live performance experience. The effects can be applied individually or together, allowing for complex layering of sounds that can captivate audiences.

The American DJ XDM-221 also includes a headphone output with an independent level control, facilitating easy monitoring of tracks before they are played. This feature is essential for DJs who need to prepare their mixes and ensure a seamless workflow.

In terms of connectivity, the XDM-221 provides various output options, including master output and booth output, accommodating different sound systems and configurations. The mixer’s rugged construction ensures reliability and durability, making it a suitable choice for both mobile DJs on the road and those performing in nightlife settings.

Overall, the American DJ XDM-221 stands out as a versatile and user-friendly mixer, packed with features designed for professional DJs looking to enhance their performances. Whether transitioning between tracks or adding creative effects, the XDM-221 delivers the tools needed to elevate any DJ set, making it a solid investment for those in the music industry.
Top Page Image Contents