![](/images/new-backgrounds/1150566/1505669x1.webp)
Replacing the Crossfader
Instructions for replacing the crossfader:
• Disconnect from main power supply
• Remove the fader knob.
• Remove the two outer screws.
• Take the fader out and unplug the connection cable.
• Connect the new fader and replace back into mixer.
Technical Specifications - model XDM-221
Inputs: |
|
Microphone | 1.5mV, 600 Ohm |
Phono | 1.2mV, 47kOhm |
Line | 100mV, 27kOhm |
Output | 28V, peak to peak |
Frequency range | |
Distortion | <0,03% |
| >75dB |
Talkover | |
Tone control | Treble: 10Khz ± 12dB |
| Bass: 100 Hz ± 12dB |
Headphone impedance | 16 Ohms |
Power supply | AC115/230V, 50/60Hz |
Dimensions | 10” W x 7.5” D x 3.75” H |
| 256 x 192 x 100 mm |
Weight | 5 lbs. / 2.3 kg |
|
|
© American DJ® AUDIO Los Angeles, CA 90058 USA
Specifications subject to change without notice.