Controls and Functions |
TOP
1 | 7 |
| 8 |
2 |
| |
3 |
| |
4 | 9 | |
5 | 10 | |
6 | ||
|
BOTTOM
1
11 
13
Controls and Functions |
1.Lens -
This is a fully focusing high quality lens. Focus the lens by manually turning the lens in a clockwise or
2.XLR Output Jack -
This jack is used to transmit the incoming DMX signal to another DMX fi xture, or transmit a Master/Slave signal to the nest
3.XLR Input Jack -
This jack is used to accept an incoming DMX signal (from a universal DMX controller) or Master/Slave (from the output jack of another
4.MINI/C Controller Jack
This jack is for use with the optional MINI/C Blackout controller only. See page 7 for details on the MINI/C controller. Do not attempt to con- nect an audio signal this jack, this will damage the PC board and void your manufactures warranty!
5.Power Cord Connection -
The power connection uses an I.E.C. type connector, use only a power cord that matches this type of connection. Be sure to only connect this unit to a power outlet that matches the printed power label on the unit. Never use a power when the ground prong has been removed or broken off. The ground prong is used to reduce the risk of electrical shock in case of an electrical short. .
6.Fuse Holder -
This housing stores the 5 amp GMA protective fuse. Always
replace with the exact same type fuse, unless other wiseinstructed,by an authorized American DJ® service technician.
7.Lamp Socket Cover Thumb Screw -
This thumb screw holds the lamp socket assembly cover (16) into place.
8.Lamp Socket Cover -
This thumb screw holds the lamp socket cover (16) into place.
©American DJ® - www.americandj.com - | ©American DJ® - www.americandj.com - |
