American Dryer Corp SL20, CG20 Lint Box/Blower Motor Assembly, refer to Blower Assembly on page

Lint Box/Blower Motor Assembly 19

Illus. No.	Part No.	Qty.	Description
1	818207	1	Temperature Sensor Probe Assembly
			(refer to Temperature Sensor Assemblies on page 14)
2	100623	1	25 M.F.D. 440 VAC Capacitor (for use with 120 volt blower)
	100633	1	6 M.F.D. 440 VAC Capacitor (for use with 220 volt blower)
3	318230	1	Capacitor Bracket (for use with 25 M.F.D. 440 VAC Capacitor)
	100632	1	Capacitor Bracket (for use with 6 M.F.D. 440 VAC Capacitor)
4	318224	1	Blower Housing Rear Support Bracket
5	130119	1	Automatic Reset Hi-Limit Thermostat
6	122002	1	Door Switch
7	154007	2	1/4” Push On Fastener
8	150301	11	#8-18 x 7/16” Phillips Pan Head TEK Screw
9	150309	2	#10-16 x 1/2” Hex Head TEK Crimptite Screw
10	152013	2	#6-32 Hex Nut
11	152008	4	#10-32 Hex Nut
12	153049	4	13/64” x 7/8” Flat Washer
13	318192	1	Lint Box Top
14	818095	1	Lint Box
15	818100	1	120 Volt Blower Assembly
			(refer to Blower Assembly on page 20)
	818147	1	220 Volt Blower Assembly
			(refer to Blower Assembly on page 20)
16	153024	4	#10 Split Lock Washer
17	117605	1	1/4” x 3/8” Sponge Tape (sold by the foot)
18	117604	1	Noise Suppression Tape (sold by the foot)
19	117604	1	Noise Suppression Tape (sold by the foot)
20	318179	1	Exhaust Tube
21	143335	1	Exhaust Transition Piece