GAS
ELECTRICAL SERVICE SPECIFICATIONS (PER DRYER)
NOTES: A. When fuses are used they must be dual element, time delay, current limiting, class RK1 or RK5 ONLY. Calculate/determine correct fuse value, by applying either local and/or National Elctrical Codes to listed appliance amp draw data.
B.Circuit breakers are
SERVICE | PHASE | WIRE | APPROX. | FUSING | CIRCUIT | ||
AMP DRAW | Dual Element | ||||||
VOLTAGE | SERVICE | BREAKER | |||||
|
|
| Time Delay | ||||
|
|
| 60 Hz | 50 Hz |
| ||
|
|
|
|
| |||
120 | 1ø | 2 | 8.7 | 15 | 15 | ||
|
|
|
|
|
|
| |
7/21/03
IMPORTANT: The dryer must be connected to the electric supply shown on the data label that is affixed to the upper left side panel area behind the top control (access) door.
IMPORTANT: The wire size must be properly sized to handle the related current.
WARNING: Any damage done to dryer components due to improper voltage connections will automatically VOID THE WARRANTY.
NOTE: Manufacturer reserves the right to make changes in specifications at any time without notice or obligation.
21
