Chapter 2 WINBIOS Setup 59
Peripheral Setup, Continued
Serial Port1 Address This option specifies the base I/O port address of serial port 1. The
settings are Auto (AMIBIOS automatically determines the correct base I/O
port address), Disabled, 3F8h, or 3E8h. The Optimal default setting is 3F8h.
The Fail-Safe default setting is Disabled.
Serial Port2 IRQ This option specifies the IRQ used for serial port2. The settings are IRQ3 or
Disabled. The Optimal default setting is IRQ3. The Fail-Safe default setting
is Disabled.
Serial Port2 Address This option specifies the base I/O port address of serial port 2. The
settings are Auto (AMIBIOS automatically determines the correct base I/O
port address), Disabled, 2F8h, or 2E8h. The Optimal default setting is 3F8h.
The Fail-Safe default setting is Disabled.
Serial Port2 Mode This option specifies the serial port 2 mode. The settings are Normal or IR
(Infrared). The Optimal and Fail-Safe default settings are Normal.
IR Duplex Mode This option selects the infrared transmission method. The settings are Full
or Half. The Optimal and Fail-Safe default settings are Full.
IR Protocol This option specifies the infrared standard used for the serial port2 infrared
capability. The settings are 1.6 us or 3/16. The Optimal and Fail-Safe default
settings are unspecified because IR is not the default setting for the Serial
Port2 Mode option.
Parallel Port IRQ This option specifies the IRQ used by the parallel port. The settings are
Disabled, IRQ 5, or IRQ 7. The Optimal default setting is IRQ 7. The Fail-
Safe default setting is Disabled.
Cont’d