Chapter 3 Programming the Flash ROM 67
Programming the Flash ROM, Continued
Beep Codes The bootblock code produces a series of beeps during Flash ROM
programming to:
• signify completion of a step (as shown on the previous screen), or to
• signal an error.
Error beeps are arranged in a coded sequence and have different meanings
depending on when they occur. The error beep codes and when they can occur
are:
Number of
Beeps Description
1Insert diskette in floppy drive A:.
2The AMIBOOT.ROM file was not found in the root directory
of the diskette in floppy drive A:.
3Base memory error.
4Flash program successful.
5Floppy read error.
6Keyboard controller BAT command failed.
7No Flash EPROM detected.
8Floppy controller failure.
9Boot Block BIOS checksum error.
10 Flash erase error.
11 Flash program error.
12 AMIBOOT.ROM file size error.
Continuous
beep Flash Programming successful. Turn power off. The turn
power on again to restart.