Connect to the StorTrends® Appliance
Step One: Power your system on
Power on by pressing this button.
Step Two: Get the IP address
Once the StorTrends® Storage Appliance is fully operational, you will see the following screen. Write down the IP Address listed in the “Ip Address” field. If you have both NICs connected to your network, there will be two IP Addresses.
STOP!
Once again, WRITE DOWN the IP Address listed in the “Ip Address” field. Go to ANOTHER COMPUTER on the same network to continue with the installation.
10 | StorTrends® 3200 Set Up Guide (StorTrends iTX version 2.7) |
