Two-Post Racks

 

 

 

 

1. If the rack holes are not 10-32

 

 

threaded, first attach the backing plate

 

 

supplied (870-1148) Πto the rack.

 

 

2. Support the UPS from the front and

 

 

back. Insert the four (4) ornamental

 

 

screws supplied with the UPS

 

 

through the mounting brackets and

 

 

into the top and bottom holes in the

 

 

U-space as shown for the Four-Post

Œ

Œ

Rack. Screw them into the threaded

 

 

holes of the backing plate.

Removing the UPS from the Rack

Due to the weight of the UPS, two people are required to remove it from the rack.

1.Remove the front panel bezel: Face the front of the UPS, and, using both hands, insert each index finger behind the lip of the curved section of the front panel bezel and pull towards you.

2.Unscrew the four ornamental screws (two screws on each mounting bracket).

3.Position one person in front of the rack and the second person either behind or on one side of the UPS for additional support.

4.Using the battery tray handle to support the front of the unit, slide the UPS partially out of the rack.

5.Supporting the UPS from the bottom or rear of the unit, slide the UPS fully out of the rack.

Connect the Battery and Attach the Front Panel Bezel

The UPS is shipped without its battery connected and the front panel bezel installed (it is packaged separately within the main box). You must connect the battery and install the plastic front panel bezel before the installation is complete.

•Œ

Ž

1.Facing the front of the UPS, locate the battery cable (in the center of the unit) and remove the tape to expose the cable connector.

2.Locate the UPS battery connector Œ which is to the right of the battery tray • and recessed. Connect the battery cable connector to the UPS connector. Press firmly to ensure that the connection is tight. You will hear a “snap” when the connector is properly seated. Also, as a visual indication, the back of the connector should be recessed (~0.64 cm) from the sheet metal

990-7096 Rev. 2

6

Page 9 Page 11
Page 10
Image 10
American Power Conversion 100 VAC user manual Connect the Battery and Attach the Front Panel Bezel, Two-Post Racks
Page 9 Page 11

100 VAC specifications

American Power Conversion (APC), a leading global provider of power management solutions, offers a range of products that cater to the evolving needs of consumers and businesses alike. Among its extensive product line, the APC 100 VAC model stands out as an essential component for maintaining reliable power for sensitive electronic equipment.

The APC 100 VAC is engineered to deliver stable voltage and reliable power to various devices, making it ideal for both residential and commercial environments. One of its core features is its capacity to regulate voltage levels, ensuring that sensitive equipment operates within specified parameters. This feature helps prevent damage caused by voltage fluctuations, which could otherwise lead to equipment failure or downtime.

Another distinguishing characteristic of the APC 100 VAC is its built-in surge protection. The unit is designed to guard connected devices against voltage spikes that occur due to lightning strikes or power outages. By diverting excess voltage away from sensitive components, the APC 100 VAC helps prolong equipment life and maintain operational efficiency.

In terms of technology, the APC 100 VAC is equipped with advanced monitoring capabilities. Users can easily track power usage, voltage levels, and overall system performance through an intuitive user interface. This technology not only aids in proactive maintenance but also empowers users to optimize their power consumption, leading to cost savings over time.

Moreover, the APC 100 VAC features a compact and sleek design, which allows it to fit seamlessly into various spaces without causing clutter. Its lightweight structure makes installation and portability hassle-free, catering to users who may need to relocate their devices frequently.

Additionally, the model integrates a variety of connectivity options, including USB and serial ports, enabling it to connect with different types of devices for enhanced functionality. This versatility makes the APC 100 VAC valuable for a range of applications, from home offices to data centers.

In summary, the American Power Conversion 100 VAC model is a robust solution for managing power needs. Its voltage regulation, surge protection, advanced monitoring technology, compact design, and connectivity options establish it as a standout choice for those seeking enhanced power management. Whether for personal or commercial use, the APC 100 VAC is poised to deliver unparalleled reliability and performance.
Top Page Image Contents