American Power Conversion 2200 VA, 3000 VA user manual Feature Feature Title Function Button

Operation

230V 120V

Battery

Charge

Diagnostic Utility Voltage

The UPS has a diagnostic feature that indicates the utility voltage.

The UPS starts a self-test as part of this procedure. The self-test does not affect the voltage display.

Press and hold the button to view the utility voltage bar graph indicator. After

a few seconds, this five-LED Battery Charge indicator on the right of the display panel will show the utility input voltage.

Refer to the figure on the left for the voltage reading. Values are not listed on the UPS.

The indicator on the UPS shows the voltage is between the displayed value on the list and the next higher value, (see Troubleshooting).

Feature	Feature Title		Function
Button
	Power On	Press this button to turn on the UPS. Continue reading for additional
		capabilities.
	Power Off	Press this button to turn off the UPS.
	Self-Test	Automatic: The UPS performs a self-test automatically when tuned on, and
		every two weeks thereafter (by default). During the self-test, the UPS
		briefly operates the connected equipment on battery.
		Manual: Press and hold the	button for a few seconds to initiate the
		self-test.
	Cold Start	When there is no utility power and the UPS is off, the cold start feature will
		switch the UPS and connected equipment onto battery power,
		(see Troubleshooting).

8 Smart-UPS XL 2200/3000 VA 120/230 VAC 3U Rack Mount User Manual