American Power Conversion 3U Rack Mount user manual Install the mounting rails in the rack

PLACEMENT

REVIEWING CONNECTORS ON THE BATTERY PACK

Œ

•

Representative View

Battery Pack Connector

Connection Cable

Use the battery pack connector Πto daisy-chain multiple battery packs to the same UPS. The connector is color-coded and keyed to prevent improper connection.

Attach the connection cable plug • into a battery pack connector on either the UPS or another battery pack. The connector is color-coded and keyed to prevent im- proper connection.

Connector The connector plug is shipped installed in the battery pack connector. A similar

Plug plug is shipped installed in the UPS. The plug should only be removed when con- necting battery packs.

INSTALLING THE BATTERY PACK

To install one or multiple battery packs, follow these basic steps. Details of each step follow this list.

1.Install the mounting rails in the rack.

2.Remove the battery trays from the battery pack.

3.Mount the battery pack in the rack. Install the battery pack at or near the bottom of the rack. Position it below the UPS.

4.Reinstall the battery trays and attach the front bezel.

5.Connect the battery pack to the Smart-UPS or another battery pack.

INSTALLING THE MOUNTING RAILS IN THE RACK

Install the mounting rails in the rack. Directions are included with the rail kit. The battery pack comes with standard 19-inch (46.5 cm) rack mounting rails, brackets, and cleats. The rack can have any of the common types of equipment mounting holes (square, round-threaded, or round-non- threaded). All necessary hardware is provided.

4