CONNECTING EQUIPMENT AND POWER TO THE UPS
1.Connect equipment to the UPS (cables not included for XLJ/XLT/XLTW models).
2.Avoid using extension cords.
•3000 VA XLJ/XLT/XLI/XLTW and 5000 VA XLJ/XLT/XLTW models: Using a power cord, plug the UPS into a
•5000 VA XLJ models: To draw full 5000 VA from the UPS have a qualified electrician cut off the input plug and hardwire the UPS to the appropriate power panel.
3.Turn on all connected equipment. To use the UPS as a master ON/OFF switch, ensure all connected equipment is switched ON. The equipment will not be powered until the UPS is turned on.
4.To power up the UPS press the 
button on the front panel.
•The UPS battery charges when it is connected to utility power. The battery charges to 90% capacity during the first three hours of normal operation. Do not expect full battery run capability during this initial charge period.
5.For additional computer system security, install PowerChute® Server
OPTIONS
Refer to the APC Web site, www.apc.com for available accessories.
External Battery Pack SURT192XLBP
Rail Kit SURTRK2
Isolation Transformer
Service Bypass Panel
5
