American Power Conversion 200-240 VAC, 8000VA user manual User Configurable Items

USER CONFIGURABLE ITEMS

NOTE: SETTINGS ARE MADE THROUGH SUPPLIED POWERCHUTE SOFTWARE, NETWORK MANAGEMENT CARD,

OPTIONAL SMART SLOT ACCESSORY CARDS OR TERMINAL MODE.

FUNCTION	FACTORY	USER SELECTABLE	DESCRIPTION
	DEFAULT	CHOICES
Automatic Self-Test	Every 14 days	Every 7 days	Set the interval at which the
	(336 hours)	(168 hours),	UPS will execute a self-test.
		Every 14 days
		(336 hours),
		On Startup Only,
		No Self-Test
UPS ID	UPS_IDEN	Up to eight characters to	Uniquely identify the UPS, (i.e.
		define the UPS	server name or location) for
			network management purposes.
Date of Last Battery	Manufacture Date	mm/dd/yy	Reset this date when you replace
Replacement			the battery modules.
Minimum Capacity	0 percent	0, 15, 25, 35, 50, 60, 75,	Specify the percentage to which
Before Return from		90 percent	batteries will be charged
Shutdown			following a low-battery
			shutdown before powering
			connected equipment.
Alarm Delay After	5 second delay	5 second delay,	Mute ongoing alarms or disable
Line Failure		30 second delay,	all alarms permanently.
		At Low Battery,
		Never
Shutdown Delay	20 seconds	0, 20, 60, 120, 240, 480,	Set the interval between the time
		720, 960 seconds	when the UPS receives a
			shutdown command and the
			actual shutdown.
Duration of	2 minutes	2, 5, 7, 10, 12, 15, 18,	The low battery warning beeps
Low Battery Warning.	PowerChute	20 minutes.	become continuous when two
			minutes of runtime remains.
	software provides
	automatic,		Change the warning interval to a
	unattended		higher setting if the operating
	shutdown when		system requires a longer interval
	approximately two		for shutdown.
	minutes of battery
	runtime remains.
Synchronized Turn-on	0 seconds	0, 20, 60, 120, 240, 480,	Specify the time the UPS will
Delay		720, 960 seconds	wait after the return of utility
			power before turn-on (to avoid
			branch circuit overloads).

9