PDU: User’s Manual 7
Installation
Toolless
mounting
1. Decide where to mount the PDU and whether the power
cord will be at the upper or lower end of the PDU.
2. Slide the mounting pegs into a set of holes in the channel
Caution
Make sure that the power cord can reach an
outlet easily, does not interfere with other
equipment, and does not bend sharply.
• In a PowerStruXure Type A system,
you must mount the PDU so that its
power cord is at the lower end.
• In any system, if you orient the PDU
so that the power cord is at the lower
end, do not mount the PDU in the
lowest position possible in the
enclosure.