12 PDU: User’s Manual
Configuration
Using a serial
port connection
0
1. Connect an available serial port of your computer to the
serial port on the front panel of the PDU, using the
supplied serial cable.
2. Run a terminal emulation program such as Windows®
HyperTerminal.
3. Configure the following settings for the serial port:
–19,200 bps
–no parity
–8 data bits
–1 stop bit
– no flow control
4. Press any key on the computer to display the PDU login
screen, which contains the Username and Password
prompts.
5. Log on by using the user name and password for the
appropriate access level:
Note
Some terminal emulation programs require
that a device be disconnected and then
reconnected for the new serial port settings
to take effect.
Access Level Default User
Name Default Password
Administrator Press ENTER.Type
apc (in lowercase).
User Press ENTER. Press ESC.