SECTION 1: SAFETY INSTRUCTIONS
1Before using the units, carry out the following:
1.1READ AND FOLLOW THE SAFETY INSTRUCTIONS.
1.2IF A FAULT IS FOUND WHEN IN USE, DO NOT PROCEED FURTHER WITHOUT CLEARING THE FAULT.
1.3CHECK THE UNIT VOLTAGE AND POLARITY AGAINST THE VALUE GIVEN IN THE INSTALLATION INSTRUCTIONS, SECTION 5.
1.4BECOME FAMILIAR WITH THE HAZARDS ASSOCIATED WITH THE UNITS.
WARNING
THESE UNITS CONTAIN THE FOLLOWING HAZARDS:
ELECTRICAL VOLTAGE
ENERGY
WEIGHT
ONLY COMPETENT PERSONS MAY WORK ON THESE UNITS.
IT IS IMPERATIVE THAT ONLY SKILLED SERVICE PERSONNEL BE ALLOWED TO INSTALL AND/OR REMOVE THE PROTECTIVE COVERS FOR SERVICING OR OTHER PURPOSES.
THE UNITS CONTAIN POTENTIALLY LETHAL VOLTAGES AND SOURCES OF HIGH ENERGY.
REFER TO MANUAL HANDLING, SECTION 8, BEFORE ATTEMPTING TO LIFT OR MOVE THE UNITS.
REFER TO THE FOLLOWING DOCUMENTS BEFORE COMMENCING WORK. ALL WORK MUST BE CARRIED OUT IN ACCORDANCE WITH THE INSTRUCTIONS THEREIN:
-MANUFACTURER'S INSTRUCTIONS
-HEALTH AND SAFETY AT WORK ACT, 1974
-ELECTRICITY AT WORK ACT, 1989
-CONTROL OF SUBSTANCES HAZARDOUS TO HEALTH (COSHH) REGULATIONS
-MANUAL HANDLING REGULATIONS.
Page 4 of 20 | Text artwork |
