2MX28B
If damage has occurred or the quantity of items is not correct, then:
1) Make a descriptive notation on the delivery receipt before signing.
2) File a damage or shortage report with the carrier that delivered the shipment.
1.3.3 Concealed Damage
It is the customer’s responsibility to unpack the power system and equipment received from
APC and check for concealed damage. Within 15 days of receipt, check the materials
received against the detailed packing list to verify that the quantity and condition are
complete and satisfactory.
Again, note any damage to the internal packing material and/or material shortages. If
damage or shortage is noted, then:
1) Request an inspection by the carrier;
2) File a concealed damage claim; and/or
3) File a material shortage claim with your APC representative.
DELAY IN NOTIFYING THE CARRIER MAY RESULT IN LOSS OF RIGHT TO
REIMBURSEMENT FOR DAMAGES OR LOSS.
If you are unsure about the appearance of a part while conducting the materials inventory
and inspection, refer to the manual or contact the Customer Service Department of APC.
Should you have any questions concerning potential damages or should you
experience a lack of cooperation from your carrier, please contact your APC
representative, or call APC.
1.3.4 Return of Damaged Goods
Should equipment be damaged and require return to APC for repair, the APC service
representative will provide instructions along with a valid returned material authorization
(RMA) number to facilitate return of the damaged goods to the APC repair center.
It is important that the steps outlined in Section 1.3.2 and Section 1.3.3 above are followed
carefully. Your APC representative will assist you, if required, in obtaining proper
disposition of an initial delivery return issue; however, a valid RMA number must be
obtained before returning any equipment to APC.