Quick Configuration
APC Management Card You can use the APC Management Card Wizard at a Windows® 98,
WizardWindows NT® 4.0, Windows 2000, or Windows XP computer to configure a PDU.
1.Insert the APC Switched Rack PDU Utility CD into a computer on your network.
2.Launch the Wizard, when prompted, or, if prompted to restart the computer, access the Wizard from the Start menu after the computer has restarted.
3.Wait for the Wizard to discover the unconfigured PDU, then follow the
|
| If you leave the Start a Web browser when finished |
|
| option enabled, you can use apc for both the user name |
| Note | and password to access the Switched Rack PDU through |
| your browser. | |
|
| |
BOOTP & DHCP | The Boot Mode setting, a TCP/IP option in the Switched Rack PDU’s | |
configuration | Network menu, identifies how TCP/IP settings will be defined. The | |
| possible settings are Manual, DHCP only, BOOTP only, and DHCP & | |
| BOOTP (the default setting). | |
The DHCP & BOOTP setting assumes that a properly configured DHCP or BOOTP server is available to provide TCP/IP settings to the APC Switched Rack PDU. If these
Note servers are unavailable, see “APC Management Card Wizard” on page 7, “Local access to the control console” on page 10, or “Remote access to the control console” on page 10 to configure the TCP/IP settings.
With Boot Mode set to DHCP & BOOTP, the Switched Rack PDU attempts to discover a properly configured server. It first searches for a BOOTP server, and then a DHCP server. It repeats this pattern until it discovers a BOOTP or DHCP server.
For more information, see “BOOTP” on page 8 or “DHCP” on page 9.
Switched Rack PDU Installation and | 7 |
