American Power Conversion PDU manual How to route power cable wires

Installation and Configuration

How to route power cable wires.

1.Route the phase conductor through a current sensor. If it is a three-phase cable, route each of the L1, L2, and L3 wires through its own current sensor.

2.Connect the L1, L2, and L3 wires to single-pole breakers or to a three-pole breaker. (The illustration below shows single-pole breakers.)

3.Connect the neutral wire (!) to the closest open termination point on the Neutral Bar.

4.Connect the ground wire (") to the closest open termination point on the Ground Bar.

!

"

Branch Current Monitoring Kit 3