American Power Conversion RT-UXICH Use only cables approved by APC, connector, serial com

BASIC CONNECTORS

	Power management software and interface kits can be used with the UPS.
	Use only cables approved by APC.
serial com
	Any other interface cable will be incompatible with the UPS
	connector.
	Manual bypass enables the user to manually put connected equipment into
	bypass mode.
normal bypass
	Emergency Power Off terminal allows the user to connect the UPS to the
	central EPO system.
EPO terminal
	The UPS features a transient voltage surge-suppression (TVSS) screw for
	connecting the ground lead on surge suppression devices such as telephone
TVSS screw	and network line protectors.
	When connecting grounding cable, disconnect the unit from the utility
	power outlet.
	External battery packs must be connected to these connectors located on
	the rear panel of the unit.
external battery
pack connector
5000/6000 VA models

	IEC 320-C19	IEC 320-C13
	16 A per	10 A per
output circuit	Receptacle	Receptacle
breakers

3