Manuals / American Power Conversion / Computer Equipment / Power Supply

American Power Conversion RT-UXICH Wiring must be performed by a qualified electrician

Models: RT-UXI RT-UXICH

1 20

Download 20 pages 56.39 Kb

Page 4

•Wiring must be performed by a qualified electrician.

ATTACH THE BEZEL TO THE UPS

5000/6000 VA XLI MODELS ONLY: HARDWIRING INSTRUCTIONS

•Wiring must be performed by a qualified electrician.

•Adhere to all national and local electrical codes.

•Install a high magnetic 30/32 A utility circuit breaker

•Use #10 AWG gauge (5sq. mm) wire.

1.Switch the utility circuit breaker OFF.

2.Remove the input access panel.

3.Remove circular knockout.

4.Run #10 AWG gauge (5sq. mm) wire through the access panel, and connect the wires to the terminal block (Green: Ground, Brown: Hot, Blue: Neutral). Use an appropriate strain relief (not included).

5.Replace the access panel.

2

Image 4

American Power Conversion RT-UXICH user manual Wiring must be performed by a qualified electrician

Contents

Uninterruptible Power Supply 3000/5000/6000 VA 220/230/240 VAC Tower/Rack-Mount 3UAPC Smart-UPS RT - UXI/UXICH User ManualPage Specifications INSTALLATIONRead the Safety Instruction sheet before installing the UPS IntroductionWiring must be performed by a qualified electrician connector Use only cables approved by APCAny other interface cable will be incompatible with the UPS 5000/6000 VA modelselectrician should perform the installation and servicing of external batteries≥ 20,000 A Avoid using extension cords Troubleshooting in this manual OPERATIONThis is not a normal condition USER CONFIGURABLE ITEMS DEFAULTFUNCTION FACTORYHigh Bypass Point Adhere to national and local electrical codes when wiring the EPO Wiring must be performed by a qualified electrician9 bits per second 9 data - bits 9 parity - none 9 stop bit Services9 flow control - none Service Battery ReplacementMAINTENANCE AND SERVICE INFORMATION TROUBLESHOOTING PROBLEM AND POSSIBLESOLUTION CAUSEFAULT AND OVERLOAD LEDS ILLUMINATE, UPS EMITS A SUSTAINED ALARM TONE FAULT LED ILLUMINATESREPLACE BATTERY LED ILLUMINATES UPS OPERATES ON BATTERY ALTHOUGH LINE VOLTAGE EXISTSLimited Warranty REGULATORY AND WARRANTY INFORMATIONRegulatory Agency Approvals and Radio Frequency Warnings 220, 230, 240 V MODELSDeclaration of Conformity APC Worldwide Customer Support