American Power Conversion SURT005, SURT006, AP9621, SYTF2J About Your Step-Down Transformer, Vac

CHAPTER 3: INSTALLATION

About Your Step-Down Transformer

This Step-Down Transformer is designed for use with a

UPS that provides a higher output voltage (200 or 208

VAC).

It converts the output to a lower voltage (100 or 120 VAC); a common voltage level used by many computers and accessories.

Figure 1: Step-Down Transformer			The Step-Down Transformer may also be used as a
			stand-alone device.
Table 1: System Configurations and Model Numbers
	Complete	Available	Nominal	Nominal	Frequency	Power
	System–	Power VA	Input	Output	Hz	Distribution
	End Item		Voltage	Voltage VAC
	SKU		VAC
North	AP9621,	4500*	208	120	60	Input: 3-foot cord with L6-
	SYTF2,					30P or hardwired.
America		5000**
	SURT005
and						*** Output: (2) 15-amp
208V						circuits with (4) 5-20R
(Ø- Ø -G)						T-slots and (2) 15-amp
						circuits with (2) 5-20R
						T-slots, or hardwired.
	SYTF3,	4500	208	120	60	Input: 2-foot cord
	SUTF3					with L6-30P.
						*** Output: (4) 20-amp
						circuits with (4) L5-20R.
Japan	SYTF2J,	3500	200	100	50 or 60	Input: 3-foot cord with
	SURT006					L6-30P.
and
200 V						***Output: (2) 15-amp
(Ø- Ø -G)						circuits with (4) 5-20R
						T-slots and (2) 15-amp
						circuits with (2) 5-20R
						T-slots.
	SYTF3J	3500	200	100	50 or 60	Input: 2-foot cord
						with L6-30P.
						***Output: (4) 20-amp
						circuits with (4) L5-20R.

*Power cord connected units have an available power of 4500 VA with a L6-30 plug. ** Units with an available power of 5000 VA must be hardwired due to input current.

*** Ensure that the pin number for T-slot receptacles is correct.

5