American Standard 091-2195 dimensions Patriot 14” Rough-InToilets, E-Force, Vitreous China

Patriot 14” Rough-In Toilets

E-Force

Gravity Flushing System

by Eljer

Patriot Elongated-Rim Toilet, 14” Rough-In (091-2195)

Note: Dimensions May Vary +/- 1/2" and are Subject to Change or Cancellation

Eljer assumes no responsibility or liability for local or state regulations which deviate from national standards. It shall be the responsibility of the installer to comply with local codes and standards prior to installation of any Eljer product.

Dimensions for Location of Supply are Suggested

CSA Certified

VITREOUS CHINA

1.6Gallons (6 Liters) of Water Per Flush Available in Elongated-Rim or Plain-Rim Close-Coupled, Two-Piece Toilet Siphon Vortex Bowl with Shelf-Top Tank Fully Glazed 2" Trapway

14" Rough-In

091-2190	Vitreous China, Two-Piece, Plain-Rim
	Toilet, 14" Rough-In, Includes (131-2120)
	Bowl and (141-2190) Tank - 77 lbs.
	Cubes 4.76
091-2195	Vitreous China, Two-Piece, Elongated-Rim
	Toilet, 14" Rough-In, Includes (131-2125)
	Bowl and (141-2190) Tank - 80 lbs.,
	Cubes 4.84
Component Parts:
131-2120	Plain-Rim Bowl - 40 lbs., Cubes 2.80
131-2125	Elongated Bowl - 43 lbs., Cubes 2.92
141-2190	14” Rough-In Tank - 37 lbs., Cubes 1.91
151-1190	Tank Lid Only for 14" Rough Tank - 16 lbs.
Optional Tank:
141-2195	Tank 14” Rough with Right-Hand
	Chrome Flush Actuator - 37 lbs.,
	Cubes 1.92
Flush Actuators:
495-2120-00	White (Standard on White Tanks)
495-2120-82	Natural (Standard on Natural Tanks)
495-2120-96	Biscuit (Standard on Biscuit Tanks)
495-2121-00	Polished Chrome (Furnished with Colors
	Other Than White, Natural, and Biscuit)
495-2121-04	Polished Brass (Optional)
495-2121-25	Brushed Nickel (Optional)
495-2121-35	Oil-Rubbed Bronze (Optional)
495-2742-00	Polished Chrome for Right-Hand
	Actuator Tank

Recommended Toilet Seats:

124-0240	Premium Solid Plastic Seat and Cover -
	Plain-Rim
124-0245	Premium Solid Plastic Seat and Cover -
	Elongated-Rim

	Plain-Rim	Elongated-Rim
Water Surface	8-1/4" x 8-3/4"	9" x 8-3/4"
	(210mm x 222mm)	(229mm x 222mm)
Trap Size	2" (51mm)	2" (51mm)
Trap Seal	2-3/8" (60mm)	2-1/2" (64mm)

ALL FIXTURE DIMENSIONS ARE NOMINAL AND MAY VARY WITHIN THE RANGE OF TOLERANCES ESTABLISHED BY ASME/ANSI STANDARDS, A112.19.2M. ALL MEASUREMENTS SHOWN ARE SUBJECT TO CHANGE OR CANCELLATION. DIMENSIONS IN PARENTHESES ARE IN MILLIMETERS 25.4 mm = 1 INCH.

Toilets 3.23 Eljer, Inc. 4/07 www.eljer.com