WIRE SELECTION GUIDE

 

 

 

 

 

 

 

 

 

Maximum distance from

 

 

fusebox to motor

 

Motor

 

 

 

 

 

50'

100'

150'

 

200'

Hi-Performance

 

 

 

 

 

 

Rating

 

120V Power Line

 

1.1

 

 

 

 

 

 

 

12

12

10

 

8

 

 

 

 

 

 

 

 

The sizes shown on this

chart are recommendations

for copper conductors

only. Always follow

local and national

electrical codes

DRAIN CONNECTION AND SYSTEM TEST

Using recommended drain opening, connect whirlpool drain to waste line. Tighten all drain joints securely. Check the pump couplings and make sure they are hand-tight. Clean the whirlpool and fill with water to a point 2" above the top of the highest jet. Recheck the pump couplings and make certain that they are not leaking. (Although the pump couplings are factory tightened and inspected, some loosening may have occurred during transit.) Make sure the whirlpool is connected to the electrical supply and turn the whirlpool on. Check for leaks around all piping connections while the whirlpool is running.

POST INSTALLATION CLEAN-UP

Remove all construction debris from bath. Tile grout can be removed with a wooden popsicle stick or tongue depressor. Do not use wire brushes or any other metal implement on bath surface.

Post installation clean-up generally can be completed using warm water and liquid dishwashing detergent. Stubborn dirt or stains may be removed using granular Spic and Span® mixed with water.

Painter's naphtha can be used to remove excess adhesives and/or wet oil-base paint.

FEATURES of YOUR NEW AMERICAN STANDARD ACRYLIC BATHTUB

Your new acrylic bathtub has been molded in the newest plumbing fixture material available today. Acrylics are tough durable finishes that are simple and easy to care for.

The colors have been formulated to match other American-Standard fixtures and enhance your choice of bathroom decorations. The high gloss surface is resistant to impact and chemicals and will retain its lasting luster with proper care and maintenance.

AFTERCARE and CLEANING

•Always fill the tub with temperate water. Excessively hot water may cause surface damage

•Remove bath mat after use and hang to dry. Allowing bath mat to dry in the tub may cause surface damage.

• Clean after use with a mild liquid household detergent cleaner. Do not use Lestoil, Lysol Disinfectant (spray or concentrate), or Lysol Basin, Tub and Tile Cleaner, Windex, Mr. Clean, Dow Disinfectant Bathroom Cleaner, or cleaning products in aerosol cans.

HARSH CHEMICALS SHOULD NEVER BE USED ON ACRYLIC SURFACES.

•Do not use wire brushes, knives or sharp objects to remove stains, cigarette tar deposits, or other surface blemishes.

•Abrasive cleaners or powders must not be used, since they will dull the surface. If the glossy surface looses its sheen, dulled areas can be restored by rubbing with a white "automotive type" polishing compound and waxing with a "liquid wax."

•Do not wax areas where you walk or stand.

•Do not allow nail polish remover, acetone, dry cleaning fluid, paint remover or other solvents to come into contact with the surface.

•Clean the surrounding surface immediately after using caustic drain cleaners.

•Burning cigarettes will damage the surface.

•Should damage to the fixture occur, repairs can be made quickly and easily.

Your distributor or builder can provide details.

753449-100 REV. A

(4) SPIC AND SPAN® IS A REGISTERED TRADEMARK OF PROCTER & GAMBLE

Page 3 Page 4
Page 4
Image 4
American Standard 1748 Wire Selection Guide, Drain Connection and System Test, Post Installation CLEAN-UP
Page 3 Page 4

1748 specifications

The American Standard 1748 is a strikingly designed one-piece toilet that combines sleek aesthetics with unparalleled functionality. Known for its impressive flushing performance and water efficiency, the 1748 is often regarded as a top choice for homeowners looking to upgrade their bathroom fixtures. One of the most notable features of this toilet is its high-efficiency flushing system, which uses just 1.28 gallons per flush. This is particularly advantageous for environmentally conscious consumers, as it promotes water conservation without sacrificing performance.

The design of the American Standard 1748 is not only modern but also practical. The toilet boasts a smooth, easy-to-clean surface that minimizes potential build-up of grime and bacteria, making regular maintenance a breeze. The sophisticated one-piece construction enhances both durability and cleanliness, as there are fewer seams and joints where dirt can accumulate.

Incorporating innovative technologies, the 1748 features the EverClean surface, which is a special glaze that helps prevent the growth of stain and odor-causing bacteria, mold, and mildew. This means longer-lasting freshness and a cleaner toilet environment. The toilet also includes a powerful siphoning action that ensures effective waste removal every time, contributing to its excellent reputation for flushing performance.

For added comfort, the American Standard 1748 is designed with a comfortable height, which accommodates a variety of users, making it an ideal choice for families and individuals alike. The ergonomic height reduces strain and enhances accessibility, which can be particularly beneficial for older adults or those with mobility issues.

Installation of the 1748 is straightforward, thanks to its integrated tank and bowl design, which allows for a seamless look in any bathroom. The toilet comes in multiple color options, enabling homeowners to select the perfect match for their existing decor.

Overall, the American Standard 1748 stands out in the market due to its blend of style, efficiency, and advanced technologies. Its combination of water-saving capabilities and innovative hygiene features make it a wise investment for any bathroom upgrade, providing lasting value and performance for years to come. Whether it's for a new build or a remodel, the American Standard 1748 is poised to deliver exceptional quality and functionality.
Top Page Image Contents