American Standard 2076 installation instructions Installation Instructions Care And Maintenance

INSTALLATION INSTRUCTIONS

CARE AND MAINTENANCE

Champion® 2-piece Toilets

Champion® Select 2-piece Toilets

Doral™ Champion® 2-piece Toilets

Doral Classic™ Champion® 2-piece Toilets

Oakmont™ Champion® 2-piece Toilets

Townsend™ Champion® 2-piece Toilets

Model 2002 Champion® Right Height™ Elongated Two Piece Toilet Model 2018 Champion® Normal Height Elongated Two Piece Toilet Model 2023 Champion® Normal Height Round Front Two Piece Toilet Model 2057 Champion® Select Right Height™ Elongated Two Piece Toilet Model 2087 Champion® Select Normal Height Elongated Two Piece Toilet Model 2035 Champion® Select Normal Height Round Front Two Piece Toilet

Model 2058 Doral Classic™ Champion® Right Height™ Elongated Two Piece Toilet Model 2074 Doral Classic™ Champion® Normal Height Elongated Two Piece Toilet Model 2076 Doral Classic™ Champion® Normal Height Round Front Two Piece Toilet Model 2367 Doral™ Champion® Right Height™ Elongated Two Piece Toilet

Model 2368 Doral™ Champion® Normal Height Elongated Two Piece Toilet Model 2369 Doral™ Champion® Normal Height Round Front Two Piece Toilet Model 2625 Oakmont™ Champion® Normal Height Elongated Two Piece Toilet Model 2627 Oakmont™ Champion® Normal Height Round Front Two Piece Toilet Model 2738 Oakmont™ Champion® Right Height™ Elongated Two Piece Toilet Model 2733 Townsend™ Champion® Right Height™ Elongated Two Piece Toilet Model 2735 Townsend™ Champion® Right Height™ Round Front Two Piece Toilet

Thank you for selecting American Standard - the benchmark of fine quality for over 100 years.

To ensure this product is installed properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes.

!CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!

NOTE: Pictures may not exactly define contour of china and components.

NOTE: BACK-TO-BACK INSTALLATION

Depending upon your plumbing and venting conditions, the flow from the Champion in a back-to-back installation may create a vacuum on the system and draw water from the opposing bowl. The National Standards Plumbing Code prohibits the use of a cross fitting for drainage as throw over is possible. The code does approve a directional "Y" style fitting with proper venting to direct the water downward and away from the other toilet.

Recommended fitting type for back-to-back installations.

RECOMMENDED TOOLS AND MATERIALS

Putty Knife	Regular Screwdriver	Adjustable Wrench	Sealant
Hacksaw	Wax Ring/Gasket	Flexible Supply Tube	1/2" Deep Well Nut Driver or
Closet Bolts	Tape Measure	Carpenters Level	Deep Well Socket Wrench

1REMOVE OLD TOILET

a.Close toilet supply valve and flush tank completely. Towel or sponge remaining water from tank and bowl.

b.Disconnect and remove supply line. NOTE: If replacing valve, first shut off main water supply!

c.Remove old mounting hardware, remove toilet and plug floor waste opening to prevent escaping sewer gases.

d.Remove closet bolts from flange and clean away old wax, putty, etc. from base area. NOTE: Mounting surface must be clean and level before new toilet is installed!

P r o d u c t n a m e s l i s t e d h e r e i n a r e t r a d e m a r k s o f A m e r i c a n S t a n d a r d I n c .	730529-100 Rev. M
© A m e r i c a n S t a n d a r d I n c . 2 0 0 6

S A V E F O R F U T U R E U S E